The principle of the thermostatic faucet is very simple. Within a certain range, the temperature and pressure of the hot and cold water supply change, and the interior of the thermostatic faucet is adjusted to keep the outlet water temperature stable at your preset temperature. There is a thermostatic faucet with a paraffin thermostatic element spool. The working principle of this kind of element is to pour a kind of high-purity special paraffin into a thin and small copper container, and then cover a piece of rubber sensing sheet on the container mouth. As the water temperature changes, the paraffin volume constant temperature faucet in the container is more technological, sophisticated, and more convenient to use than ordinary faucets. As long as the water temperature changes, it will also change accordingly, greatly satisfying consumers' Different needs for water temperature.

Before installing the thermostatic faucet, first, check whether the water pipe is hot on the left and cold on the right. Remember not to connect the hot and cold water pipes wrongly, so as to prevent the faucet from working normally. Gas and solar water heaters cannot use thermostatic faucets because the water pressure is too low. Please don't forget to install the hot and cold water filters when installing the thermostatic faucet.

1. Users with small solid lumps in tap water are not suitable for using constant-temperature faucets;

2. If the tap water contains powdery sediment or soft foreign matter, it may reduce the sensitivity of the thermostatic valve core, and may also shorten the service life of the thermostatic faucet;

3. Try to shorten the distance between the water heater and the faucet so that the hot water can reach the faucet as soon as possible.