1. Invite experienced and qualified professionals to carry out construction and installation. When installing, the faucet should try not to hit hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. Pay attention to remove the debris in the pipeline and install the faucet.

2. When the water pressure is not less than 0.02mpa (ie 0.2kgf/cm2), after a period of use, if the water output is found to decrease, or even the water heater is turned off, you can lighten it at the water outlet of the faucet. Unscrew the screen cover gently to remove impurities, and it will generally recover.

3. Don't switch the faucet too hard, just turn it gently. Even the traditional faucet does not require a lot of effort to screw it. In particular, do not use the handle as an armrest to support or use.

4. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretched state, and do not coil it on the faucet when not in use. At the same time, when in use or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.

5. The ideal cleaning technique is to rinse the faucet with clean water, and then use a soft cotton cloth to wipe all the water on the metal surface of the faucet, because the water will form scale on the metal surface after the water volatilizes. Wipe gently, do not rub vigorously. Dry the faucet with a moistened sponge and soft leather to make the faucet radiant.

6. It is best to use mild liquid glass cleaner, or acid-free, non-abrasive soft liquid and completely dissolved powder. Non-friction solution polish can remove the rough mask and deposits on the faucet. Do not use any Abrasive cleaners, cloth or paper cloth, and any acid-containing cleaners, polishing abrasives or rough cleaners.